Composition-tunable PtCu porous nanowires as highly active and durable catalyst for oxygen reduction reaction

To accelerate the commercialization of fuel cells, many efforts have been made to develope highly active and durable Pt-based catalyst for oxygen reduction reaction (ORR). Herein, PtCu porous nanowires (PNWs) with controllable composition are synthesized through an ultrasound-assisted galvanic replacement reaction. The porous structure, surface strain, and electronic property of PtCu PNWs are optimized by tuning composition, which can improve activity for ORR. Electrochemical tests reveal that the mass activity of Pt_0.5Cu_0.5 PNWs (Pt/Cu atomic ratio of 1:1) reaches 0.80 A mg_Pt^?1, which is about 5 times higher than that of the commercial Pt/C catalyst. Notably, the improved activity of the porous nanowire catalyst is also confirmed in the single-cell test. In addition, the large contact area with the carrier and internal interconnection structure of Pt_0.5Cu_0.5 PNWs enables them to exhibit much better durability than the commercial Pt/C catalyst and Pt_0.5Cu_0.5 nanotubes in accelerated durability test.     

Techno-economic analysis of hydrogen energy for renewable energy power smoothing

With the increasing proportion of renewable energy (mainly wind power and photovoltaic) connected to the grid, the fluctuation of renewable energy power brings great challenges to the safe and reliable operation of power grid. As a clean, low-carbon secondary energy, hydrogen energy is applied in renewable energy (mainly wind power and photovoltaic) grid-connected power smoothing, which opens up a new way of coupling hydrogen storage energy with renewable energy. This paper focuses on the optimization of capacity of electrolyzers and fuel cells and the analysis of system economy in the process of power output smoothing of wind/photovoltaic coupled hydrogen energy grid-connected system. Based on the complementary characteristics of particle swarm optimization (PSO) and chemical reaction optimization algorithm (CROA), a particle swarm optimization-chemical reaction optimization algorithm (PSO-CROA) are proposed. Aiming at maximizing system profit, the capacity of electrolyzers and fuel cells are constrained by wind power fluctuation, and considering environmental benefits, government subsidies and time value of funds, the objective function and its constraints are established. According to the simulation analysis, by comparing the calculated results with PSO and CROA, it shows that PSO-CROA effectively evaluates the economy of the system, and optimizes the optimal capacity of the electrolyzers and fuel cells. The conclusion of this paper is of great significance for the application of hydrogen energy storage in the evaluation of power smoothness and economy of renewable energy grid connection and the calculation of economic allocation of hydrogen energy storage capacity.     

Spinel CoFe2O4 /carbon nanotube composites as efficient bifunctional electrocatalysts for oxygen reduction and oxygen evolution reaction

In the development of fuel cells, it is the key to large-scale commercialization of fuel cells to rationally design and synthesize efficient and non-noble metals-based bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this paper, spinel CoFe₂O₄/carbon nanotube composites (CoFe₂O₄/CNTs/FA) were synthesized by solvothermal and calcination method. XRD, TEM, XPS and BET characterizations indicate that the addition of complexing agent fumaric acid can improve the crystal growth kinetics and morphology of CoFe₂O₄/CNTs nanohybirds. The as-synthesized CoFe₂O₄/CNTs/FA pyrolyzed at 500 °C have an outstanding bifunctional catalytic activity for ORR and OER with the potential of 1.62V (vs. RHE) at a current density of 10 mA/cm² and half-wave potential E_1/2 = 0.808V (vs. RHE) in alkaline electrolyte, respectively. It is obviously better than unloaded CoFe₂O₄ nanoparticles and commercial CNTs. CoFe₂O₄/CNTs/FA also exhibit better methanol tolerance ability and durability than commercial Pt/C and RuO₂ catalyst. This investigation broadens an idea of simple compounding of spinel with carbon-based materials to improve electrochemical properties.     

Effect of sintering conditions on structural and morphological properties of Y- and Co-doped BaZrO3 proton conductors

BaZrO₃-based materials doped with a trivalent cation have excellent chemical stability and relatively high proton conductivity which makes them potential proton conducting oxide materials for various electrochemical device applications such as hydrogen processing, high-temperature electrolysis, and solid electrolyte in fuel cells. However, BaZrO₃ showed poor sinterability, requiring high sintering temperatures (1700–2100 °C) with longtime sintering (20–100 h) to achieve the desired microstructure and grain growth. This sintering problem can be solved by slightly doping BaZrO₃ with a sintering aid element. Therefore, in this study, two different zirconate proton conductors: BaZr_0·9Y_0·1O_3-α (BZY) and BaZr_0·955Y_0·03Co_0·015O_3-α (BZYC) were sintered in an air atmosphere and an oxygen atmosphere for 20 h in the temperature range of 1500–1640 °C. The sinterability was evaluated by analyzing the XRD diffraction patterns, lattice constant, lattice strain, crystallite size, relative density, open porosity, closed porosity, surface morphology, grain size, and grain boundary distribution, using the XRD, SEM, EDX, and Archimedes density measurement methods. It is concluded that in an oxygen atmosphere, sintering aid Co not only improves the relative density but also produces highly dense fine particles with clear grain boundaries which are promising for electrochemical hydrogen device applications.     

Investigating the effect of custom‐made insoles and exercises on lower limb and back discomfort in assembly‐line workers in a rubber tire factory: A randomized controlled trial

Many occupations require standing for prolonged periods, which can be a major contributor to musculoskeletal problems and cause disturbances in different parts of the body, especially the lower back and lower extremities. The aim of this study was to investigate the effect of custom‐made insoles and exercise training on the lower limb and lower back discomfort in workers on a production line at a rubber tire factory. One hundred male workers (mean age 35.96 years, work experience of 10.62 years, standing time 6.58 hr) participated in this randomized controlled trial. The men were randomly assigned to one of four groups: (a) custom‐made insole plus lower limb exercises, (b) insoles only, (c) lower limb exercises only, and (d) no intervention. Discomfort level was recorded with a visual analog scale and a body map. The data were analyzed with analysis of covariance. The results showed a significant difference in discomfort levels between groups in the lower back (p = .001), thigh (p = .001), and knee (p = .001) areas. The combined insole and exercise group had less discomfort in the lower back, thigh, and knee. In the group that used the insole only without exercises, the discomfort level in the lower back area was reduced. The results indicate that the simultaneous use of insoles and exercises might be an effective intervention to reduce discomfort in the lower limbs and lower back in workers who remain standing for prolonged periods.     

Efficient hydrogen production for industry and electricity storage via high-temperature electrolysis

The paper describes the development status of Sunfire's reversible solid oxide cell (RSOC) technology. Here, Sunfire is a pioneer in the field of high-temperature electrolysers (HTE) for renewable hydrogen production which can be operated as a fuel cell for power generation in a reverse mode. The maturity of the technology is improved stepwise so that first applications in the field of hydrogen production for industry and electricity storage can be tackled. Three application examples where larger scale prototype has been installed will be discussed: 1) A power-to-power electricity storage based on hydrogen, 2) a RSOC unit that is installed in an iron and steel works, and 3) a pressurized SOEC prototype which will be integrated with a methanation unit. Results show the potentials of the technology in connection with fluctuating renewable energy sources.     

Solution‐Processable Photonic Inks of Mie‐Resonant Hollow Carbon–Silica Nanospheres

Hollow carbon–silica nanospheres that exhibit angle‐independent structural color with high saturation and minimal absorption are made. Through scattering calculations, it is shown that the structural color arises from Mie resonances that are tuned precisely by varying the thickness of the shells. Since the color does not depend on the spatial arrangement of the particles, the coloration is angle independent and vibrant in powders and liquid suspensions. These properties make hollow carbon–silica nanospheres ideal for applications, and their potential in making flexible, angle‐independent films and 3D printed films is explored.     

Natural Silk Film for Magnesium Protection: Hydrophobic/Hydrophilic Interaction and Self‐Healing Effect

Biodegradable implants are required in order to provide successful treatment of injuries. Temporary magnesium‐based implants with particular properties are needed in cases when it is desirable not only to maintain vital activity, but also to initiate the self‐healing process of damaged bones or tissues as well. Unfortunately, the use of magnesium alloys is limited due to the fast biodegradability of the applied material. The aim of this research is to improve the corrosion resistance of magnesium alloys by sonochemical treatment in silk solution followed by additional layer‐by‐layer deposition of natural silk on the magnesium surface. The sonication process is carried out at a frequency of 20 kHz during 5–10 min, while the duration of the silk layer deposition is 15 min. The corrosion behavior of magnesium substrates modified by natural silk layer‐by‐layer assembly is studied. Magnesium substrates sonochemically treated in silk solution demonstrate three times better corrosion resistance compared to control samples sonochemically treated in water. Additional deposition of a silk layer enhances obtained corrosion resistance by 18 times, resulting in a 54‐fold increase overall.     

径向弹簧蓄能密封结构最大接触应力的有限元分析

为研究径向弹簧蓄能密封结构的密封特性，针对典型径向弹簧蓄能密封结构，分析其密封机制以及O形弯曲金属螺旋弹簧的弹性特性；采用ANSYS有限元分析软件，建立典型弹簧蓄能密封结构的非线性有限元分析模型，对弹簧蓄能密封圈在不同压缩率、不同介质压力下的接触应力进行分析，研究在多种工况下最大接触应力的变化情况。结果表明：压缩率保持不变时，最大接触应力随着介质压力的增大而增大；介质压力保持不变时，随着压缩率的增大，最大接触应力先增大再减小。对压缩率、介质压力与最大接触应力的关系进行曲线拟合，可用于指导弹簧蓄能密封结构的精确设计。